香蕉速播

Sichuan Mumen Investment Promotion - whole house Customization: six criteria for smart selection of solid wood furniture

Time: June 23, 2018 hits: two thousand and three hundred second


 

Who said that the price of solid wood furniture must be high? The key to choose solid wood furniture is to buy whether to buy expensive, not professional also have no contact, take a look at the following six major selection criteria, let you buy useful and reasonable quotation of solid wood furniture.

It is necessary to know the situation of raw materials and timber

Solid wood furniture is the most crucial is wood, in the purchase of solid wood furniture, the primary need to pay attention to wood raw materials, if even the most basic raw materials are in doubt, then the quality is not good.

See tree species: pine, oak, mahogany, etc

Looking at tree species is the most common way to choose solid wood furniture. Generally speaking, cheap solid wood furniture species include pine, oak, mahogany, etc. the price of pine is cheap, but its function is not as good as wood-based panel except for environmental protection; And like mahogany is more expensive, and the function is also good, but affected by the color, not suitable for all personality home.

Wood condition: cracking, wormhole, mildew

See raw material still need to see woodiness condition, have good tree species, still need to have both good woodiness, cracking, wormhole, mildew and so on are wood common question, if see the wood appearance has crack, perhaps a small insect eye, such wood do not choose, other, found wood greenish, water trace confirmed that the wood soaked in water mildew, such information can not buy.

Appearance discrimination: scab, wood grain and cross section

When choosing solid wood furniture, you can have a look at the appearance and see if there are scabs. If you find scab on one side of the wood, you can see whether there is the same scar on the other side. If so, it is confirmed that the raw material of wood is not secure; In addition, we have to look at the wood grain. Different tree species have different wood grain. The grain on both sides of the solid wood data should be corresponding one by one, so that it is pure solid wood.

Check the details to see the good quality

In addition to selecting good tree species and timber, solid wood furniture is the same as ordinary furniture. When selecting, you must pay attention to the details, such as the connection of various parts and the painting condition on the surface.

It is strong enough, and all parts are closely connected

Furniture is made up of various parts Solid wood furniture is formed by tenon and tenon of different shapes and sizes, so when choosing furniture, you should try its bearing capacity to see whether the joint position of tenon and groove is loose; If solid wood furniture is fixed with screws, it is recommended not to purchase, because its firmness is not high.

Talking about safety and looking at the quality of exterior paint

Solid wood furniture is most afraid of flooding and fire. Generally speaking, the appearance of solid wood furniture is best covered with a layer of fireproof varnish, which is conducive to the fire prevention and waterproof of furniture, especially some with more contact with the outside world.

 

 

Last article: What are the maintenance methods of solid wood doors?

Next: Floor market chaos

 

National Service Hotline

028-82662668

  • Mobile website

  • Official wechat

Copyright © 2017-2018   website: http://youfangjiaoyu.cn , All rights reserved   copyright © Chengdu Zhengtai Wood Industry Co., Ltd   Website map
Address: Zhengtai Pinsheng wood industry, building 2, 58 Huasheng Road, Chenghua District, Chengdu, Sichuan Province     028-82662668      Chengdu website construction Provide technical support and Website optimization

Online Service
Online Service
Service hotline